Astra S56Y Stereo Camera
Overview
S56Y is a new-generation YUV stereo camera for embodied intelligence and data collection applications. Two ST VB1940 color Global Shutter sensors and built-in ISP processing provide 2400(H) × 1800(V) @ 30fps YUV422 8bit output per eye. Its lens provides a 128° horizontal and 91° vertical field of view. Compared with S56D, selection differences include built-in image processing, output format and field of view.
The design combines a 60 ± 0.5mm stereo baseline, precision stereo active alignment (AA), a six-axis IMU and GMSL2. Standard and lightweight housings and connector options are available.

Specifications
| Parameter | Specification |
|---|---|
| Sensors | ST VB1940 × 2 |
| Resolution per eye | 2400(H) × 1800(V) |
| Frame rate per eye | 2400(H) × 1800(V) @ 30fps |
| Shutter | Global Shutter |
| Output format | YUV422 8bit |
| ISP | Built-in |
| Baseline | 60 ± 0.5mm |
| Color | Color |
| IMU | Six-axis IMU |
| Interface | GMSL2, 6Gbps |
| Connector | Amphenol Z-code Fakra / SS-mini01 |
| Operating temperature | -40 to +85°C |
| Storage temperature | -40 to +95°C |
| Overall dimensions (including lenses) | W: 27mm, L: 84mm, H: 30.3mm |
| Standard / lightweight weight | 85 ± 10g / 69 ± 10g |
| Ingress protection | Lens IP67; camera IP54 |
Note Each 5MP sensor outputs 2400(H) × 1800(V) (4.32MP). Frame rates are per eye.
Lens Specifications
| HFOV / VFOV | Aperture | Focal length | Depth of field |
|---|---|---|---|
| 128° ± 3° / 91° ± 3° | F2.0 | 2.67mm | 0.4m - INF |
Dimensions
Drawing note Dimensions are in mm. The listed height includes the lenses. The arrow marks the upright image direction. The camera coordinate origin is -4.456mm relative to the top of the lens.
IMU and Stereo Calibration
IMU Parameters
| Parameter | Value |
|---|---|
| IMU | Six-axis IMU |
| Accelerometer range | ±16g |
| Gyroscope range | ±2000°/s |
| Output data rate | 200Hz |
Stereo Calibration and Parameter Access
Factory calibration covers stereo camera intrinsics / extrinsics and IMU intrinsics / extrinsics. Stereo calibration uses the Omni-Radtan model; consumers must use a matching model. Read calibration with SENSING sgMIX or parse it using the SENSING stereo camera OTP data format specification.
Use the factory calibration for the individual device.
Configuration Options
| Model | Lightweight | Connector |
|---|---|---|
| S56Y | No | Amphenol Z-code Fakra |
| S56Y_A | Yes | Amphenol Z-code Fakra |
| S56Y_B | Yes | SS-mini01 |
| S56Y_C | No | SS-mini01 |
Confirm the full model, connector, cable and housing weight option when ordering and integrating.
Camera Usage
Integration with Custom Platforms
- Check the GMSL2 6Gbps receiver, connector and power requirements. Obtain the integration and synchronization settings for this model.
- Set up the GMSL2 link and configure host capture for each eye (2400(H) × 1800(V) @ 30fps, 8-bit YUV422). Apply the supplied frame synchronization settings.
- Verify left/right ordering, image orientation, frame synchronization and IMU data. Read the calibration for the individual device.