Skip to main content

Astra S36A Stereo Camera

Overview​

S36A is a new-generation HDR stereo camera for embodied intelligence and data collection applications. Two Sony ISX031 color Rolling Shutter sensors with built-in ISP support 140dB HDR and YUV422 output at 1920(H) × 1536(V) @ 30fps or 1920(H) × 1080(V) @ 60fps per eye.

The design combines a 60 ± 0.5mm stereo baseline, precision stereo active alignment (AA), a six-axis IMU and GMSL2. Standard and lightweight housings and connector options are available.

S36A stereo camera housing

Specifications​

ParameterSpecification
SensorsSony ISX031 × 2
Resolution per eye1920(H) × 1536(V) / 1920(H) × 1080(V)
Frame rate per eye1920(H) × 1536(V) @ 30fps; 1920(H) × 1080(V) @ 60fps
ShutterRolling Shutter
Output formatYUV422 8bit
ISPBuilt-in
HDR140dB
Baseline60 ± 0.5mm
ColorColor
IMUSix-axis IMU
InterfaceGMSL2, 6Gbps
ConnectorAmphenol Z-code Fakra / SS-mini01
Operating temperature-40 to +85°C
Storage temperature-40 to +95°C
Overall dimensions (including lenses)W: 27mm, L: 84mm, H: 28.8mm
Standard / lightweight weight85 ± 10g / 69 ± 10g
Ingress protectionLens IP67; camera IP54

Note Output resolutions and frame rates are per eye.

Lens Specifications​

HFOV / VFOVApertureFocal lengthDepth of field
120° ± 3° / 93° ± 3°F2.02.94mm0.4m - INF

Dimensions​

S36A mechanical dimensions and imaging coordinate system

Drawing note Dimensions are in mm. The listed height includes the lenses. The arrow marks the upright image direction. The camera coordinate origin is -4.73mm relative to the top of the lens.

IMU and Stereo Calibration​

IMU Parameters​

ParameterValue
IMUSix-axis IMU
Accelerometer range±16g
Gyroscope range±2000°/s
Output data rate200Hz

Stereo Calibration and Parameter Access​

Factory calibration covers stereo camera intrinsics / extrinsics and IMU intrinsics / extrinsics. Stereo calibration uses the Omni-Radtan model; consumers must use a matching model. Read calibration with SENSING sgMIX or parse it using the SENSING stereo camera OTP data format specification.

Use the factory calibration for the individual device.

Configuration Options​

ModelLightweightConnector
S36ANoAmphenol Z-code Fakra
S36A_AYesAmphenol Z-code Fakra
S36A_BYesSS-mini01
S36A_CNoSS-mini01

Confirm the full model, connector, cable and housing weight option when ordering and integrating.

Camera Usage​

Integration with Custom Platforms​

  1. Check the GMSL2 6Gbps receiver, connector and power requirements. Obtain the integration and synchronization settings for this model.
  2. Set up the GMSL2 link and configure host capture for each eye (1920(H) × 1536(V) @ 30fps or 1920(H) × 1080(V) @ 60fps, 8-bit YUV422). Apply the supplied frame synchronization settings.
  3. Verify left/right ordering, image orientation, frame synchronization and IMU data. Read the calibration for the individual device.