Skip to main content

Astra S56D Stereo Camera

Overview​

S56D is a new-generation RAW stereo camera for embodied intelligence and data collection applications. Two ST VB1940 color Global Shutter sensors each output 2400(H) × 1800(V) @ 30fps in RAW10, for vision systems that process RAW images on the host. The lens provides a 140° horizontal and 102° vertical field of view.

The design combines a 60 ± 0.5mm stereo baseline, precision stereo active alignment (AA), a six-axis IMU and GMSL2. Standard and lightweight housings and connector options are available.

S56D stereo camera housing

Specifications​

ParameterSpecification
SensorsST VB1940 × 2
Resolution per eye2400(H) × 1800(V)
Frame rate per eye2400(H) × 1800(V) @ 30fps
ShutterGlobal Shutter
Output formatRAW10
ISPRAW output for host-side processing
Baseline60 ± 0.5mm
ColorColor
IMUSix-axis IMU
InterfaceGMSL2, 6Gbps
ConnectorAmphenol Z-code Fakra / SS-mini01
Operating temperature-40 to +85°C
Storage temperature-40 to +95°C
Overall dimensions (including lenses)W: 27mm, L: 84mm, H: 30.3mm
Standard / lightweight weight82 ± 10g / 66 ± 10g
Ingress protectionLens IP67; camera IP54

Note Each 5MP sensor outputs 2400(H) × 1800(V) (4.32MP). Frame rates are per eye.

Lens Specifications​

HFOV / VFOVApertureFocal lengthDepth of field
140° ± 3° / 102° ± 3°F2.02.67mm0.4m - INF

Dimensions​

S56D mechanical dimensions and imaging coordinate system

Drawing note Dimensions are in mm. The listed height includes the lenses. The arrow marks the upright image direction. The camera coordinate origin is -4.456mm relative to the top of the lens.

IMU and Stereo Calibration​

IMU Parameters​

ParameterValue
IMUSix-axis IMU
Accelerometer range±16g
Gyroscope range±2000°/s
Output data rate200Hz

Stereo Calibration and Parameter Access​

Factory calibration covers stereo camera intrinsics / extrinsics and IMU intrinsics / extrinsics. Stereo calibration uses the Omni-Radtan model; consumers must use a matching model. Read calibration with SENSING sgMIX or parse it using the SENSING stereo camera OTP data format specification.

Use the factory calibration for the individual device.

Configuration Options​

ModelLightweightConnector
S56DNoAmphenol Z-code Fakra
S56D_AYesAmphenol Z-code Fakra
S56D_BYesSS-mini01
S56D_CNoSS-mini01

Confirm the full model, connector, cable and housing weight option when ordering and integrating.

Camera Usage​

Integration with Custom Platforms​

  1. Check the GMSL2 6Gbps receiver, connector and power requirements. Obtain the integration and synchronization settings for this model.
  2. Set up the GMSL2 link and configure host capture for each eye (2400(H) × 1800(V) @ 30fps, RAW10). Apply the supplied frame synchronization settings.
  3. Verify left/right ordering, image orientation, frame synchronization and IMU data. Read the calibration for the individual device.